windows xp « Belajar Jaringan Komputer

Blog
About

Melihat TraceRoute Windows XP di Wireshark

Agustus 16, 2009 pada 11:34 pm | Ditulis dalam Wireshark Experience | 23 Komentar
Kaitkata: belajar jaringan, belajar wireshark, icmp, trace route, tracert, tutorial wireshark, windows xp, wireshark

Apakah ada yang belum mengetahui fungsi traceroute ? Saya rasa semua pasti sudah tahu, karena traceroute adalah program sederhana untuk melihat hop-hop dari computer kita ke suatu IP address di Internet. Di bawah ini adalah hasil copy paste dari traceroute notebook saya ke www.yahoo.com.

C:\>tracert www.yahoo.com

Tracing route to www.yahoo.com [209.131.36.158]

over a maximum of 30 hops:

1 1 ms 2 ms 2 ms AlliedTelesyn.ATI [192.168.1.1]

2 39 ms 36 ms 36 ms 1.subnet125-161-216.speedy.telkom.net.id [125.16

1.216.1]

3 * * * Request timed out.

4 40 ms 40 ms 41 ms 61.5.116.25

5 37 ms 35 ms 36 ms 61.5.119.110

6 255 ms 258 ms 255 ms tm.net.my [58.26.87.53]

7 349 ms 470 ms 350 ms 58.27.103.33

8 475 ms 353 ms 363 ms 203.106.6.162

9 353 ms 352 ms 355 ms 219.94.9.178

10 353 ms 343 ms 345 ms 58.27.101.158

11 343 ms 341 ms 357 ms ae1-p171.msr2.sp1.yahoo.com [216.115.107.87]

12 347 ms 353 ms 355 ms ae0-p171.msr2.sp1.yahoo.com [216.115.107.83]

13 353 ms 351 ms 359 ms www.yahoo.com [209.131.36.158]

Trace complete.

Untuk lebih memperdalam mengenal paket pada jaringan, saya mencoba menangkap paket traceroute ini dengan wireshark. Setelah itu, saya bandingkan hasil yang ada di wireshark dengan copy paste text output di atas. Cukup menarik, dari sini saya bisa belajar mengenal traceroute yang ada pada Windows.
Lanjutkan Membaca Melihat TraceRoute Windows XP di Wireshark…

Understanding How Windows XP ‘Finds’ Other Windows XP using Wireshark

Juli 8, 2009 pada 10:36 am | Ditulis dalam Wireshark Experience | Tinggalkan Komentar
Kaitkata: belajar packet, name resolution, tutorial wireshark, windows xp, wireshark

Most of us are Windows XP fans, and almost every day we communicate to other computer doing file sharing, printer sharing, etc. Of course, it works easily without knowing what are happening behind this. And some of us are just enough with this. But to be honest, if we know how it works behind the scene, it will give us a very good understanding on the ‘packet level’ in how it works. Especially, if we are planning to migrate our network from L2 to VLAN L3 routing.

Before I wrote this article, I turned on my Wireshark, and just easily did a ‘Start > Run’ and then typed \\serverkoe, where serverkoe is basically my server sitting on the LAN and in the same subnet with me. Hopefully this small packet walkthrough will add small knowledge for you.